The saw is a carpenter’s tool. Over time, chainsaws will continue to develop.
If in the past we only knew saws with hand power, now many saws are combined with electric power.
These saws are selected based on need, whether for industry or just for regular home work. Not only that, nowadays saws can be used for a variety of materials, such as plastic, steel, etc.
The shape of the resulting cut is also different for each saw, ranging from arc shape, wavy shape, etc.
Mistakes in choosing the type of saw are common, especially by ordinary people. This error can result in damage to the saw, which in turn will be economically detrimental.
The wrong saw selection will have an impact on the saw tooth getting blunt, the saw that works more aggressively, the results of the cut are uneven, etc. So in this article, we will discuss tips on choosing a saw for the job you are going to do.
1. Know the Type of Work to Do
Each job requires different saw specifications. Like when you are going to cut wood straightly, the type of saw used will be different from a saw that can cut wood into an arc.
The same thing applies to the room, there are types of saws that can be used in open spaces, there are also special saws for narrow spaces.
2. Pay Attention to the Number of Tooth on the Saw
If your job requires a fine cut, you need to pay attention to the tooth of saws you use. A saw with a large number of tooth will produce a smooth cut of wood, it also will remove a lot of material.
This means a saw with a large number of tooth will produce an uneven cut, but it will cut wood faster.
3. Know the Materials Used in Saws
Did you know, it turns out that saws can be made of various materials, such as brass saws, hacksaws, and diamond saws. If your job is very light, a brass saw can be an option.
If your job is quite heavy, then a hacksaw can be an option. And if the job is extra heavy work, then a diamond saw can be an option.
4. Pay Attention to the Saw Gullet
Saw gullet means the space between each tooth on the blade. A larger and wider gullet will result in larger pieces of material.
5. Pay Attention to the Tooth Configuration
The shape of the saw’s tooth configuration can also determine the saw’s performance. Several tooth configurations are designed for cross-cutting, tearing and cutting of certain materials such as laminates, MDF, etc.
There are several types of tooth configurations that are commonly used, namely Flat Top (FT), Alternative Top Bevel (ATB), and Combination Tooth (CT).
The Flat Top (FT) tooth configuration is generally used for tearing, the Alternative Top Bevel (ATB) tooth configuration is generally used for cross-cutting.
While the Combination Tooth (CT), is generally a combination of Flat Top and Alternative Top Bevel which is used for general cutting purposes.
6. Pay Attention to the Angle of the Tooth on the Saw
Tooth angle refers to the center line of the blade eye. A blade with a “positive hook angle” means the tooth is leaning forward, while a “negative hook angle” means the tooth is tilted back, which means that it rotates in the opposite direction to the blade rotation.
A larger positive blade angle will result in a blade with a more aggressive movement, and this will reduce cutting quality.
A few tips in choosing a chainsaw, one thing that is important for your consideration is the result you want.
Whether you need a saw that makes your job lighter and easier to work with, whether you want a smooth and perfect result, it all depends on your job.
Also consider the price of the saw and how much money you have. If you have enough funds to buy a good quality saw, then you are better off buying a good quality saw.
A good quality saw will give the best results even though it is a little more expensive. However, if you have limited funds, be sure to choose a saw according to the tips given.