6 Parts of Rivet Pliers and Their Functions

Rivet pliers, or just “rivet pliers,” are a type of pliers that are used for installing things or making designs.

Rivet pliers are different from other pliers because they are used to install rivets or rivets.

Rivet nails aren’t like regular nails because they are made to mount or connect iron plates, like those on iron towers, bridges, shelves, and so on.

The results of a connection made with rivet nails are permanent, so they need to be put in with accuracy, accuracy, and careful calculation.

Depending on the size of the rivet nails, the size of the rivet pliers also changes. Not only that, but the handles of rivet pliers come in different shapes and can be used with different amounts of force.

Rivet pliers use a force of compression to push the rivet nails and the field out of the way (iron plate). The compressive force comes from air that is squished in the rivet pliers.

Also, this compressed air moves to the piston, which pushes the rivet into the field.

As was already said, rivet pliers don’t differ much from regular pliers. But if you want to know more about rivet pliers, here are the parts you need to know:

Parts of Rivet Pliers

1. Handle

When nailing rivet nails in a field, the handle or handle on rivet pliers works like the handle on other pliers. Most of the time, a strong rubber material like PVC is used to cover the handle of rivet pliers.

2. Handle Lock

The locking handle on the end of the rod of the rivet pliers is very important. Especially for putting in rivets and nails.

The handle lock function not only locks the pliers’ handle in place but also makes it easier to take the rivet eye off or put it on.

When putting in rivet eyes, the handle of the rivet pliers should be locked by the handle lock for safety.

3. Spare Dyes

Most of the time, rivet eyes are set up in rows of up to three pieces. This rivet eye is used to set a limit or standard for how many rivet nails can be used.

Every rivet eye is a different size, ranging from 2.4 mm to 4.8 mm. If you need to, you can move or replace these rivet eyes.

For instance, if the rivet nail is 3.2 mm in size, the rivet eye that goes on the head of the rivet pliers must also be 3.2 mm.

4. Head

The most important part of the rivet pliers is the head or head. This is because this part is where the rivet nail that will be nailed to a field will be gripped.

The head is made of hard and strong materials like aluminum, aluminum alloy, or stainless steel.

5. Pin Dye

The standard for the rivet nails that will be put in later is the dye pin on the head of the rivet pliers. This dye pin can be changed out with a different rivet eye on the pliers’ handles.

6. Cavity

The rivet hole is where the rivet nail enters before it is nailed to a plane. The size of the hole varies, depending on the rivet eye used.

It is important to note that the rivet hole must match the size of the rivet that will be used. Make sure the rivet nail is not too big or not too small in size when inserted into the rivet nail hole.

Thus the explanation of the parts of the rivet pliers. Hopefully, the above information can be useful and increase knowledge about rivet pliers.