18 Ironing Parts

The iron has several parts because it is an electronic device. Iron is a metal tool that is used to smooth out wrinkled clothes. Most irons get their power from electricity.

There are two kinds of irons for the household class: dry irons, also called electric irons, and steam irons. Both types of irons do the same thing: to get rid of wrinkles and make clothes look smooth.

Many people may not know what goes into an iron. Even though each of these parts has its job, some can’t be found on other irons. And now, let’s look at some things you need to know about ironing.

Steam Iron Part

Ironing Parts

1. Handle

Most irons have handles made of things that don’t conduct electricity. Most of the time, plastic is chosen because it doesn’t get too hot when the hand touches it.

The size of the iron’s handle has been changed so that it is easy to hold.

2. Spray Button

The spray button on a steam iron is a button that can be used to get the water droplets out of the container where they are stored. Press the spray button before ironing clothes so water can come out and wet the clothes.

3. Spray Head

The spray head on a steam iron is used to get rid of the water vapor that is made. As everyone knows, the steam iron will turn the water in the storage container into water vapor when it heats the water.

When you iron the clothes, the spray head must be empty of water. This keeps rust from happening.

4. Fill Opening

To use a steam iron, you have to spray water on the clothes or wet them with water. The iron container has a hole in the front where water can be added.

This hole isn’t very big, so you need a funnel or a special glass to get water in without it spilling out.

5. Front Tip

The iron tip is made slightly pointed to make the ironing process easier in narrow parts, such as the inside of the sleeve, the inner fold area, and so on.

6. Shell

The iron body is usually made of an insulating material or does not easily conduct heat. This part of the iron body is also a cover for all the iron components that are on the inside.

7. Water Level Tube

The water indicator tube is made of translucent or transparent material, making it easier to find how much water is in the water storage container.

8. Spray Control

On the steam iron, there is a spray button that lets you change the size of the spray of water that comes out of the water outlet. Most of the time, this spray hole is at or near the bottom of the iron. When the spray button is pressed, the water in the container will come out as water droplets.

9. Soleplate

The part that touches the clothes directly is the iron pad. This part is made of metals like aluminum and stainless steel that can transfer heat to the clothes and keep them from wrinkling.

Some models of irons even have a base made of a material that doesn’t stick. So, if the iron is too hot, the clothes won’t stick or stick together.

10. Fabric Guide

The fabric instructions are found on the iron guide when determining the temperature or temperature suitable for the type of fabric. Several types of clothing, such as cotton and linen, such as cotton and linen, can be ironed at the same temperature.

11. Temperature Control

The steam iron has a temperature setting that can be adjusted to the type of clothing being ironed. The iron should not be too hot for light clothing to prevent damage to the fabric. While thick clothes, such as jackets and jeans, can use high temperatures while ironing.

12. Heel Rest

This iron holder is at the bottom or close to the cable. Most of the time, the iron stand is flat. We all know that iron is a piece of electronic that can make heat.

It would be best to stand it up or put it vertically when you haven’t used the iron in a few minutes. Because of this, each iron needs a stand to be put in a vertical position.

13. Signal Lamp

The indicator light on the iron is a marker that the iron is in the heating process. This indicator light can turn off when the temperature is as hot as needed.

14. Vertical Cord Lift

As the name implies, this cable is made to stand vertically. This cable is generally an ironing cable; it’s just coated with a stiff rubber material on the outside. A rigid rubber layer aims to prevent the cable from being disconnected from the iron due to bending.

15. Cord

The cable is a part of the iron that lets the electricity from the socket flow through it. Later, electricity will flow from this cable to a vertical cable (called a “vertical cord lift”), which will turn on the heating element inside the iron.

The ironing cable is made of flexible fibers wrapped in a cloth to protect it from the outside. The average length of an ironing cord is between 1.7 and 2 meters. With this length, it will be easy for people to iron clothes.

Electric Iron Part

Ironing Parts

The parts of an electric or dry iron are not that different from those of a steam iron. The only difference is that electric irons don’t have spryer holes, buttons, or other parts that are only found on steam irons.

A few of the most important parts of an electric iron are:

1. Indicator Light

This part shows whether the iron is turned on or off. The indicator light will be on when the new iron is plugged into the wall outlet. The light will go out if the iron is taken out of the outlet.

When the light comes on, it can also be used as a sign that the heating process is done. If the iron’s heating temperature is the same as the temperature set by the temperature regulator, the light will turn off quickly.

2. Temperature Regulator

The electric iron has a temperature regulator that controls how hot the iron needs to be to press clothes. On the temperature regulator, there is also a list of what kinds of clothes the iron’s temperature is best for. So, it will be easy for users to change the temperature size because the temperature regulator has a guide.

3. Teflon Soleplate

The metal base of the electric iron is just as important as the iron itself. This part of the base touches the clothes that will be ironed later. Some models of electric irons are made with materials that don’t stick, like Teflon, so clothes don’t stick to the iron when used.

So, this describes the parts that makeup iron. We hope that the above information can help.