5 Differences Between Wet-Cell and Dry-Cell Batteries

The battery is a device that functions to store electrical energy in the form of chemical energy. One of the most important components for vehicles such as cars and motorbikes is indeed the types of motor battery.

The difference is that the car battery has a voltage of 12 volts, while the motor has three types of voltages, namely 12 volts, 9 volts, and 6 volts.

In general, the battery can be refilled again when it runs out. However, considering that the price is quite expensive, there are several ways to treat the battery so that it is durable, if it has been used for more than one year, here are the ways:

  • Discard all the sulfuric acid liquid in the battery then rinse it with pure water four times and fill it with the red battery liquid then give the battery an electric shock.
    In the parking position for either a motorbike or a car, remove one of the cables on the positive pole of the battery so that no current flows.
    Also, check the water level of the measuring battery with a hydrometer periodically.

This method can be practiced, but if it has been done without success, another way to take is to buy a new battery.

Currently, there are various types of batteries sold in the market, and the most widely used are wet and dry batteries. These two batteries have differences from several sides even though they have the same function. The following is an explanation of the differences between a dry-cell battery and a wet-cell battery, including:

wet cell abttery and dry cell battery

1. Price

The first difference is regarding the price of the battery. You know that the price of any type of battery is quite expensive and it drains the bag, especially car batteries. However, if a comparison is made between the two types of batteries, namely dry batteries and wet batteries. So the price for dry batteries is more expensive when compared to wet batteries.

2. Battery Content

The second difference lies in the content contained in dry batteries and wet batteries. Dry batteries have a denser liquid.

The liquid form of a dry battery is a gel and a dry battery is designed with a dark color selection, for example black, yellow, white, and blue.

As for the wet battery, the content has a thinner texture so that it resembles water. Because it has the exact shape of wet battery water, it contains 70% red battery and 30% blue battery.

So when there is a charging system from the car alternator, the battery water will boil and evaporate, so it is necessary to add it.

3. Maintenance

In terms of maintenance, a dry battery has a very small level of gel evaporation so that this type of battery is more efficient. This battery is called maintenance-free.

Caring for this dry battery should be used for running often rather than leaving it in the garage. This type of battery has a longer service life compared to a wet battery.

As for the care for wet batteries, the owner must check the moisture content in the battery. In addition, it also cleans the positive and negative poles of the battery.

Then make sure the battery water is in accordance with the plus size, don’t forget to heat the car regularly. As well as to turn off electronic devices such as air conditioners, radios, and lights before turning off the car.

4. Procedure

Dry batteries have relatively durable durability during hot conditions due to the slight evaporation process. Even so, the service life for dry batteries is relatively short.

As for the wet battery, the evaporation process is faster, especially in very hot conditions. In addition, this battery can be used multiple times and can be refilled.

Refilling battery water on a wet battery is to refill the blue battery. Because this type of battery is purified water, made through filtering, and free from lead.

The contents in the wet battery are 30% and need to be recharged because during evaporation this type of blue battery is experiencing a reduction.

5. Fluid

The liquid contained in dry batteries is a gel that functions as a coolant and conductor between cells. A dry battery that has been filled with red battery water can be immediately charged after filling the water. It can be charged for 30 minutes.

As for the liquid in the wet battery, use liquid media as a coolant and conductor between cells. The liquid used is sulfuric acid. The function of this liquid is to produce electrical power when it is in the battery with the cell plate.

Those are some explanations about the most basic differences between dry batteries and wet batteries. However, the choice of using dry batteries and wet batteries can be tailored to your needs. Because there are some who feel suitable for using dry batteries and there are some that are suitable for using wet batteries. Both, as described above, have their respective advantages and disadvantages.