4 Causes of Iron Not Heating and Solutions

Iron is one of the most necessary electronic devices in daily household activities.

Without an iron, either an electric iron or a steam iron, clothes that have been washed and dried will remain wrinkled.

Without an iron, one would wear wrinkled clothes that are far from neat.

As crucial as iron is, just like any other electronic device, there are some problems that can occur with it.

One of the most common problems with irons is that they don’t heat up; here are some reasons why they don’t heat up that you need to know about.

1. Scale on the Ironing Plate

If the iron doesn’t heat up, it could be because dirt has built up and turned into a crust on the plate or base.

Check the plate or base if you turn on the iron and it doesn’t get hot.

Wait until it cools down first so you can thoroughly check and clean any scale that may have been there for a long time.

Solution: If you check the iron base and find that dirt has built up and turned crusty, you should clean it immediately.

Make sure to take the scale off the iron when you’re not using it or when it’s not plugged in.

When the iron is cold, use a soft cloth and a small amount of white vinegar.

Rub the iron base with a clean, soft cloth, and then wait for it to dry.

When it is dry, try turning the iron back on to see if it is still hot.

2. Incorrect Iron Settings

Check the settings when you turn on the iron and it doesn’t heat up.

Check by hand because it’s possible that the iron is set wrong.

Solution: If the iron doesn’t heat up and you think it might be because of how it’s set, check the part right away.

Most of the time, the knobs are set or adjusted wrong, so the heat doesn’t come out.

Set the iron’s knob so that when the iron is turned on, the temperature goes back to normal.

Change the heat level based on the type of fabric you are ironing so that you don’t hurt either the fabric or the iron.

3. Problems with Contact Stops

If the iron doesn’t heat up, it could be because the plug is broken.

If the socket is broken, it’s possible that the iron won’t heat up.

Solution: Try plugging the iron cord into a different outlet to see if the problem is with the socket.

When the problem is the socket, the iron will generally work if you try a different socket.

But if you plug the iron into a different socket and it still doesn’t heat up, the problem is with the iron itself.

4. Thermostat faults

The thermostat is the part of an iron that controls the temperature when the iron is turned on, and the ironing plate heats up.

The thermostat can raise or lower the temperature, so users can change the level of heat depending on the type of clothing they are drying.

If dirt or something else gets in the way of the thermostat, it might not work right, and the heat won’t come out as it should.

Solution: Turn the knob on the thermostat to see if the temperature changes.

If you keep turning the dial on the thermostat and the heat doesn’t change, that’s a sign that it’s broken.

If dirt is blocking it, clean it right away. If it can’t be fixed, the best thing to do is buy a new one.

There are many reasons your iron won’t heat up, so check these things and deal with them as needed.