5 Causes of Electrocution Washing Machines and How to Fix it

A common problem with older washing machines is that they often emit electric shocks when touched in certain areas.

If left unchecked, this will later lead to even more severe damage later. The first thing to do to solve this problem is to know the cause first, then determine what solution should be taken.

The factor where the washing machine is stored is actually the first thing that has the most influence on why an electric shock occurs. Especially if the placement is in the bathroom which is definitely often splashed with water.

But apart from that, there are other things you need to know, including:

1. Cable Problem

The condition of the cable is the first thing that must be checked when there is an electric shock. It could be damaged or the installation position is not right. If this is left unchecked, it will be even more dangerous, because the shock generated will be even greater.

There are several cable conditions that are a factor in causing an electric shock.

  • The Peeled Cable

What often happens is that we don’t realize the damage to the cable from the start, until the cable slowly begins to peel, and eventually can have an impact on the electric shock caused.

If this is a problem, you can install electrical insulation to cover the part of the cable that is peeling off. But keep in mind that this solution can only be done when the situation or the damage is still minor.

If it is severe and cannot be helped anymore, then you should immediately replace it with a new one.

  • The Grounding Cable Problem

The next cable condition that can cause electric shock is when the grounding cable is not present or when the installation position is wrong.

This partition serves to release excess electric charge that occurs during the washing machine running process, by draining it to the ground.

It could be that this part is not installed properly, or even not there at all. To check this component, you can check the cable contained in the power cable which usually has three colors (red, blue and yellow or it can be blue, black, and green).

If the problem lies in the grounding cable, you can fix it if the installation is not quite right. Or if this section doesn’t exist from the start, then you can add it yourself.

If you have checked the cable and there are no problems at all, then you can switch to an electrical plug that can be reversed. You can simply flip the plug in the right direction to solve this.

2. Electric Socket

Sockets can not be avoided from problems and damage. A damaged power outlet can shock the user. If something like this happens, then all you have to do is replace it with a new one.

However, as is well known that we should not play with the socket. So if the problem really comes from here, then you should call a professional who is widely available now.

3. The Components of the Machine

The components contained in the washing machine can experience an electric short circuit or what is commonly called a short circuit. This can result in the washing machine electrocuting or in a worse stage, not being able to use it at all.

If you have a washing machine that is equipped with a dryer inside, it could be damage to this part and cause electric shock if used.

The fix is that you have to call and bring in competent personnel who are experienced in this kind of field to perform repair services.

This is because the dryer is in the washing machine which is definitely difficult to reach, especially for ordinary people.

4. The Placement Factor

The place where a washing machine is placed is also very influential. If placed in a humid place such as a bathroom, it is possible to give an electric shock. This could be due to the frequent splashing of water on the body of the washing machine.

5. The Dynamo Motor

This section serves as the driver of a washing machine. It is natural that this dynamo motor will overheat and then burn due to frequent use, marked by a charred smell that appears in the washing machine.

As a result, an electrical short can occur which causes an electric shock if the body of the washing machine is touched.

The solution you can do is to check it with a tool called multitester. But if there is none, you can call a technician to see the damage and fix it.

You have to know the cause of the problems that occur in the washing machine before you can solve them.

The above has been exposed to several factors that cause the washing machine to cause an electric shock when touched. If by chance you are experiencing this condition, first find out which part is problematic, then immediately take the appropriate action.